Features
|
・Finish inside diameter with right and left chucks at the same time to obtain high-precision concentricity.
|
 |
Configuration and materials
|
|
|
Dimensions
| Item No. | D |
Standard hole diameters ød1,ød2 H8 (left/right can be freely conbined) | L | F |
M | Fastening torque (N⋅m) | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RSS16 | 16 | 3 | 4 | 5 | 6 | 24 | 6 | 3 | 0.7 | |||||||||||||||||||
| RSS20 | 20 | 5 | 6 | 8 | 10 | 30 | 7 | 3 | 0.7 | |||||||||||||||||||
| RSS25 | 25 | 8 | 10 | 11 | 12 | 36 | 9 | 4 | 1.7 | |||||||||||||||||||
|
RSS32 |
32 | 12 | 14 | 15 | 16 | 41 | 10 | 4 | 1.7 | |||||||||||||||||||
Specifications
|
Item No. |
Maximum hole diameter (mm) |
Rated torque (N⋅m) |
Maximum torque (N⋅m) |
Maximum Rotating speed (rpm) | Moment of inertia (kg⋅m2) | Mass |
|---|---|---|---|---|---|---|
| (g) | ||||||
| RSS16 | 6 | 0.3 | 0.6 | 24,000 | 1.2x10-5 | 30 |
| RSS20 | 10 | 0.5 | 1 | 19,000 | 3.5x10-6 | 55 |
| RSS25 | 12 | 1 | 2 | 15,000 | 1.0x10-5 | 100 |
| RSS32 | 16 | 2 | 4 | 12,000 | 3.1x10-5 |
200 |
・Since there is no tolerance for misalignment, this type is suitable in cases where misalignment can be absorbed on the shaft side.