ASJ

Features

・Compact,strong, and excellent durability.
・Wide product range enables selection of the ideal size.
・Combination of sintered stainless hubs and a carbon FRP.

asj 01

Configuration and materials

 

asj zumen en

asj hinban en

・Key groove shape complies with new JIS standards.Special key grooves should be shown in separate drawings.
・For d1 and d2,ordera for hole diameters other than the standard values can be made.
・Feel free to consult us about custom orders.
・combinations of set screw and clamp styles can also be costomized.

Dimensions of key groove shape

asj keymizo
Hole diameter
d1,d2
KbtNominal dimension of keys
bxh
Basic dimen
sion
Tole
rance
Basic dimen
sion
Tole
rance
6-8 2 2 ±0.0125 1.0 +0.1
0
2x2
8-10 3 3 1.4 3x3
10-12 4 4 ±0.0150 1.8 4x4
12-17 5 5 2.3 5x5
17-20 6 6 2.8 6x6

Dimensions

Item
No.
D

Standard hole diameters ød1,ød2 H8

Dsd3LFL1

Fastening
torque
(N⋅m)
ASJ6 6 1 1.5 2                             6.2  2.4 8.4 1.5 3 1.6 0.15
ASJ8 8 1   2 3                           8.2  3.4  9.6  1.7  3.4  0.15
ASJ10 10     2 3 4                         10.2  4.4  10.2  1.8  3.6  2  0.3
ASJ12 12       3 4 5                       12.5  4.0  14.2  2.5  5  3  0.7
ASJ15 14.5         4 5 6 6.35 8                 15 5.0 16 2.7 5.4 3 0.7
ASJ17 16.8           5 6 6.35 8                 17.5 7.2 19.8 3.3 6.6 4 1.7
ASJ20 20             6 6.35 8 9.53 10 12           21 8.2 21.4 3.5 7 4 1.7
ASJ26 26             6 6.35 8 9.53 10 12 14         27 12 25.6 4.2 9 4 1.7
ASJ30 30                  8   10 12 14         31 13 33 5.8 12 4 1.7
ASJ34 34                     10 12 14 15 16    

 35

14 34 5.5 13 5 4.0
ASJ38 38                     10 12 14 15 16 18 20  41 16 40 7.0 15 5 4.0

 ・If the torque applied to the coupling is small,wear is suppressed. Even if the eccentricity is somewhat large,the amount of wear will not increase.

Specifications

Item No.

Transmission torque

(N⋅m)

Allowable misalignmentTorsional rigidity
(N⋅m/rad)

Maximum

rotating speed
(rpm)

Moment of inertia
(kg⋅m2)
Mass
(g)
Rated torqueMaximum torqueparallel misalignment
(mm)

angular misalignment

(°)

ASJ



6 0.3 0.8 0.3 2 9 12,000 5.9x10-9 1.5
8 0.5 1.2 0.3 2 13 12,000 2.1x10-8 2.5
10 0.8 2 0.3 1.5 21 12,000 5.2x10-8 4
12 1.0 3 0.4 1.5 44 12,000 1.5x10-7 8
15 1.6 5 0.5 1.5 90 10,000 3.5x10-7 11
17 2.2 7 0.5 1.5 250 10,000 7.8x10-7 18
20 3.2 10 0.5 1.5 340 8,000 1.7x10-6 29
26 6 22 0.6 1.5 420 6,500 6.1x10-6 65
30 15 45 0.7 1.5 1,200 6,200 1.4x10-5 105
34 16 60 0.7 1.5 2,400 6,000 2.4x10-5 150
38 28 85 0.7 1.5 3,500 5,800 4.3x10-5 230

・Heat resistance(ambient temperature): -30℃ to 80℃.

・When the hole diameter exceeds dimension d3 characteristics such as the rated torque may deteriorate.
・Maximum permissoble eccentricity and declination are not guaranteed to be used under rated torque. The amount of eccentricity and declination affects the speed of wear, by synergistic with the operating torque and rotating speed.