Features
・Strong to large shock torque and rovibrational motion, the model for servo systems is free from a halt, offering secure operation. |
Configuration and materials
|
・Key groove shape complies with new JIS standards. |
Dimensions of key groove shape |
|
Dimensions
Item No. |
Standard hole diameters ød1,ød2 H8 (left/right can be freely conbined) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MBDS 32 |
8 | 10 | 12 | 15 |
Specifications
Item No. |
Allowable torque (N⋅m) |
Maximum rotating speed (rpm) | Torsional rigidity (N⋅m/rad) |
Back lash (deg. MAX) |
Allowable angular misalignment (°) |
Allowable parallel misalignment (mm) |
Allowable end play (mm) | Moment of inertia (kg⋅m2) |
Mass (g) |
---|---|---|---|---|---|---|---|---|---|
MBDS32 | 50 | 3,000 | 8,000 | 0.1 | 3 | 0.2 | ±0.4 | 3.0x10-5 | 190 |
*1. Rated torque is for parallel misalignment≦0.1. At 0.2, it will be 1/2 the value.
*2. Maximum rotating speed is for parallel misalignment≦0.1. At 0.2, it will be 1/2 the value.
*3. Up to 5°angular misalignment is absorbed on the conditions of 1/3 or less the values of maximum rotating speed and 1/2 or less the values of rated torque.
*4. Up to 0.4 parallel misalignment is absorbed on the conditions of 1/3 or less the values of maximum rotating speed and 1/2 or less the values of rated torque.
*5. As a high torque model with less shaft-combining force, key groove processing is basically required.