APJ

Features

・Compact,strong, and excellent durability.
・Rated torque is approximately twice compared with APJU series.


apju 01

Configuration and materials

 

apju zumen en

apju hinban en

・Key groove shape complies with new JIS standards.Special key grooves should be shown in separate drawings.
・For d1 and d2,ordera for hole diameters other than the standard values can be made.
・Feel free to consult us about custom orders.
・Combinations of set screw and clamp styles can also be costomized.

Dimensions of key groove shape

apju keymizo
Hole diameter
d1,d2
KbtNominal dimension of keys
bxh
Basic dimen
sion
Tole
rance
Basic dimen
sion
Tole
rance
6-8 2 2 ±0.0125 1.0 +0.1
0
2x2
8-10 3 3 1.4 3x3
10-12 4 4 ±0.0150 1.8 4x4
12-17 5 5 2.3 5x5
17-20 6 6 2.8 6x6

Dimensions

Item
No.
D

Standard hole diameters ød1,ød2 H8

Dsd3LFL1

Fastening
torque
(N⋅m)
APJU15 14.5 4 5 6                     16 7.2 18.7 3.3 6.6 2.5 1.0
APJU17 16.8   5 6 6.35                   19 8.7 24.2 4.3 8.8 3 1.8
APJU20 20     6 6.35 8 9.53 10             22 9 27.3 4.8 10 3 1.8
APJU26 26     6 6.35 8 9.53 10 12           29 12 30.5 5.5 11.5 4 4.5*1
APJU30 30          8   10             32.5 14 32.8 6 12 5 8.0
              12 14         4 4.5
APJU34 34             10 12 14 15 16     37 14 34.5 6.3 13 5 8.0*2
APJU38 38             10 12 14 15 16 18 20 41 17 39.7 7.3 15 5

8.0

 ・The dimension Ds is the circumference of the clamp bolt head.

 *1 The clamp bolt fastening torque for APJU26 is 3.8N・m when the hole diameters (d1,d2) are ≧12.

 *2 The clamp bolt fastening torque for APJU34 is 5.4N・m when the hole diameters (d1,d2) are ≧16.

Specifications

Item No.

Transmission torque

(N⋅m)

Allowable misalignmentTorsional rigidity
(N⋅m/rad)

Maximum

rotating speed
(rpm)

Moment of inertia
(kg⋅m2)
Mass
(g)
Rated torqueMaximum torqueparallel misalignment
(mm)

angular misalignment

(°)

End play

(mm)

APJU15 3 12 0.3 0.6 ±0.1 700 8,000 5.1x10-7 17
17 5 18 0.3 0.6 ±0.1 1,000 7,000 1.2x10-6 30
20 7 26 0.4 0.6 ±0.1 2,200 6,000 2.6x10-6 48
26 10 35 0.5 0.6 ±0.2 4,000 5,000 8.7x10-6 90
30 24 70 0.6 0.6 ±0.2 5,500 5,000 1.7x10-5 117
34 32 105 0.6 0.6 ±0.2 6,000 4,000 2.8x10-5 165
38 50 140 0.6 0.6 ±0.3 9,000 4,000 5.2x10-5 250

・Heat resistance(ambient temperature): -30℃ to 80℃.

・When the hole diameter exceeds dimension d3 characteristics such as the rated torque may deteriorate.
・Maximum permissoble eccentricity and declination are not guaranteed to be used under rated torque. The amount of eccentricity and declination affects the speed of wear, by synergistic with the operating torque and rotating speed.

・Maximum rotational speed corresponds to no parallel misalignment (that is less than 1/10 of allowable value).

・There is a possibility of slip occurreng when a high transmission torque is loaded. For thisreason,it may be neceaasry to process the key groove.