FJU

Features

・Combineation of aluminum hubs and a polyacetal slider to handle shaft diameters up to φ35.
・High-precision slider groove for light press-fitting and zero backlash, enabling servo operation.
・Sliders can also be made of chemical-resistant or heat-resistant materials.

fju 01

Configuration and materials

 

fju zumen en

fju hinban en

・Key groove shape complies with new JIS standards.Special key grooves should be shown in separate drawings.
・For d1 and d2,ordera for hole diameters other than the standard values can be made.
・Feel free to consult us about custom orders.
・Combinations of set screw and clamp styles can also be costomized.

Dimensions of key groove shape

fju keymizo
Hole diameter
d1,d2
KbtNominal dimension of keys
bxh
Basic dimen
sion
Tole
rance
Basic dimen
sion
Tole
rance
14-17 5 5 ±0.0150 2.3 +0.1
0
5x5
17-22 6 6 2.8 6x6
22-30 8 5 ±0.0180 3.3

+0.2
0
8x7
30-35 10 10 10x8

Dimensions

Item
No.

Standard hole diameters ød1,ød2 H8

d3LL1FA

Fastening
torque*
(N⋅m)
FJU44  44   14   15   16   18   20                             22.5 46 15 7.5 14.5 5 8.4
FJU55 55               18   20   22   25                     28 57 19 9.5 17 6 14.4
FJU70 69                       22   25       28   30   35     39 77 25 12.5 24 8 30

* For amall hole diameters, it is necessary to fasten the clamp bolt to higher torque than the listed value to prevent slip. The listed fastening torque is intended only as an approximate guide.

Specifications

Item

No.

Rated torque

(N⋅m)

Maximum

Rotating speed

(rpm)

Torsional rigidity
(N⋅m/rad)

Allowable parallel

misalignment

(mm)

Allowable angular

misalignment

(°)
Moment of inertia
(kg⋅m2)
Mass
(g)
FJU44 26 10,000 1,500 0.7 1.5 4x10-5 140
FJU55 40 8,000 2,800 1 1.5 11x10-5 260
FJU70 72 6,000 4,800 1.2 1.5 40x10-5

450

・Heat resistance(ambient temperature): -25℃ to 80℃. (rated torque should be 1/2 in 80℃.)